`InputsMembersInLinearCompressionBendingNotCertified`#

class ansys.dpf.core.operators.result.members_in_linear_compression_bending_not_certified.InputsMembersInLinearCompressionBendingNotCertified(op: ansys.dpf.core.dpf_operator.Operator)#

Bases: ansys.dpf.core.inputs._Inputs

Intermediate class used to connect user inputs to members_in_linear_compression_bending_not_certified operator.

Examples

>>> from ansys.dpf import core as dpf
>>> op = dpf.operators.result.members_in_linear_compression_bending_not_certified()
>>> my_time_scoping = dpf.Scoping()
>>> op.inputs.time_scoping.connect(my_time_scoping)
>>> my_field_yield_strength = dpf.Field()
>>> op.inputs.field_yield_strength.connect(my_field_yield_strength)
>>> my_field_end_condition = dpf.DataSources()
>>> op.inputs.field_end_condition.connect(my_field_end_condition)
>>> my_streams = dpf.StreamsContainer()
>>> op.inputs.streams.connect(my_streams)
>>> my_data_sources = dpf.DataSources()
>>> op.inputs.data_sources.connect(my_data_sources)
>>> my_manufacture = bool()
>>> op.inputs.manufacture.connect(my_manufacture)
>>> my_partial_factor = float()
>>> op.inputs.partial_factor.connect(my_partial_factor)
>>> my_mesh = dpf.MeshedRegion()
>>> op.inputs.mesh.connect(my_mesh)
>>> my_bending_moment_y = dpf.FieldsContainer()
>>> op.inputs.bending_moment_y.connect(my_bending_moment_y)
>>> my_bending_moment_z = dpf.FieldsContainer()
>>> op.inputs.bending_moment_z.connect(my_bending_moment_z)
>>> my_axial_force = dpf.FieldsContainer()
>>> op.inputs.axial_force.connect(my_axial_force)
>>> my_class_cross_section = bool()
>>> op.inputs.class_cross_section.connect(my_class_cross_section)
>>> my_fabrication_type = bool()
>>> op.inputs.fabrication_type.connect(my_fabrication_type)

Overview#

Methods

connect

Connect any input (an entity or an operator output) to any input pin of this operator.

Properties

`time_scoping`	Allows to connect time_scoping input to the operator.
`field_yield_strength`	Allows to connect field_yield_strength input to the operator.
`field_end_condition`	Allows to connect field_end_condition input to the operator.
`streams`	Allows to connect streams input to the operator.
`data_sources`	Allows to connect data_sources input to the operator.
`manufacture`	Allows to connect manufacture input to the operator.
`partial_factor`	Allows to connect partial_factor input to the operator.
`mesh`	Allows to connect mesh input to the operator.
`bending_moment_y`	Allows to connect bending_moment_y input to the operator.
`bending_moment_z`	Allows to connect bending_moment_z input to the operator.
`axial_force`	Allows to connect axial_force input to the operator.
`class_cross_section`	Allows to connect class_cross_section input to the operator.
`fabrication_type`	Allows to connect fabrication_type input to the operator.

Special methods

`__str__`
`__call__`
`__getitem__`

Import detail#

from ansys.dpf.core.operators.result.members_in_linear_compression_bending_not_certified import InputsMembersInLinearCompressionBendingNotCertified

Property detail#

property InputsMembersInLinearCompressionBendingNotCertified.time_scoping: ansys.dpf.core.inputs.Input[ansys.dpf.core.scoping.Scoping | int]#

Allows to connect time_scoping input to the operator.

Returns:: An Input instance for this pin.
Return type:: input

Examples

>>> from ansys.dpf import core as dpf
>>> op = dpf.operators.result.members_in_linear_compression_bending_not_certified()
>>> op.inputs.time_scoping.connect(my_time_scoping)
>>> # or
>>> op.inputs.time_scoping(my_time_scoping)

property InputsMembersInLinearCompressionBendingNotCertified.field_yield_strength: ansys.dpf.core.inputs.Input[ansys.dpf.core.field.Field]#

Allows to connect field_yield_strength input to the operator.

This pin contains field of beam’s Yield Strength defined by the user.

Returns:: An Input instance for this pin.
Return type:: input

Examples

>>> from ansys.dpf import core as dpf
>>> op = dpf.operators.result.members_in_linear_compression_bending_not_certified()
>>> op.inputs.field_yield_strength.connect(my_field_yield_strength)
>>> # or
>>> op.inputs.field_yield_strength(my_field_yield_strength)

property InputsMembersInLinearCompressionBendingNotCertified.field_end_condition: ansys.dpf.core.inputs.Input[ansys.dpf.core.data_sources.DataSources | ansys.dpf.core.field.Field]#

Allows to connect field_end_condition input to the operator.

This pin contains file csv or field of beam’s end condition defined by the user. If no input at this pin found, it would take end conditions value of all beams as 1

Returns:: An Input instance for this pin.
Return type:: input

Examples

>>> from ansys.dpf import core as dpf
>>> op = dpf.operators.result.members_in_linear_compression_bending_not_certified()
>>> op.inputs.field_end_condition.connect(my_field_end_condition)
>>> # or
>>> op.inputs.field_end_condition(my_field_end_condition)

property InputsMembersInLinearCompressionBendingNotCertified.streams: ansys.dpf.core.inputs.Input[ansys.dpf.core.streams_container.StreamsContainer]#

Allows to connect streams input to the operator.

result file container allowed to be kept open to cache data.

Returns:: An Input instance for this pin.
Return type:: input

Examples

>>> from ansys.dpf import core as dpf
>>> op = dpf.operators.result.members_in_linear_compression_bending_not_certified()
>>> op.inputs.streams.connect(my_streams)
>>> # or
>>> op.inputs.streams(my_streams)

property InputsMembersInLinearCompressionBendingNotCertified.data_sources: ansys.dpf.core.inputs.Input[ansys.dpf.core.data_sources.DataSources]#

Allows to connect data_sources input to the operator.

result file path container, used if no streams are set.

Returns:: An Input instance for this pin.
Return type:: input

Examples

>>> from ansys.dpf import core as dpf
>>> op = dpf.operators.result.members_in_linear_compression_bending_not_certified()
>>> op.inputs.data_sources.connect(my_data_sources)
>>> # or
>>> op.inputs.data_sources(my_data_sources)

property InputsMembersInLinearCompressionBendingNotCertified.manufacture: ansys.dpf.core.inputs.Input[bool]#

Allows to connect manufacture input to the operator.

Manufacturing processus:hot finished if TRUE or cold formed if FALSE. Default value : hot finished.

Returns:: An Input instance for this pin.
Return type:: input

Examples

>>> from ansys.dpf import core as dpf
>>> op = dpf.operators.result.members_in_linear_compression_bending_not_certified()
>>> op.inputs.manufacture.connect(my_manufacture)
>>> # or
>>> op.inputs.manufacture(my_manufacture)

property InputsMembersInLinearCompressionBendingNotCertified.partial_factor: ansys.dpf.core.inputs.Input[float]#

Allows to connect partial_factor input to the operator.

partial factor for resistance of members to instability assessed by member checks. Default value: 1.0

Returns:: An Input instance for this pin.
Return type:: input

Examples

>>> from ansys.dpf import core as dpf
>>> op = dpf.operators.result.members_in_linear_compression_bending_not_certified()
>>> op.inputs.partial_factor.connect(my_partial_factor)
>>> # or
>>> op.inputs.partial_factor(my_partial_factor)

property InputsMembersInLinearCompressionBendingNotCertified.mesh: ansys.dpf.core.inputs.Input[ansys.dpf.core.meshed_region.MeshedRegion]#

Allows to connect mesh input to the operator.

Mesh containing beam’s properties defined by user

Returns:: An Input instance for this pin.
Return type:: input

Examples

>>> from ansys.dpf import core as dpf
>>> op = dpf.operators.result.members_in_linear_compression_bending_not_certified()
>>> op.inputs.mesh.connect(my_mesh)
>>> # or
>>> op.inputs.mesh(my_mesh)

property InputsMembersInLinearCompressionBendingNotCertified.bending_moment_y: ansys.dpf.core.inputs.Input[ansys.dpf.core.fields_container.FieldsContainer]#

Allows to connect bending_moment_y input to the operator.

Fields Container of bending moment on axis y defined by user

Returns:: An Input instance for this pin.
Return type:: input

Examples

>>> from ansys.dpf import core as dpf
>>> op = dpf.operators.result.members_in_linear_compression_bending_not_certified()
>>> op.inputs.bending_moment_y.connect(my_bending_moment_y)
>>> # or
>>> op.inputs.bending_moment_y(my_bending_moment_y)

property InputsMembersInLinearCompressionBendingNotCertified.bending_moment_z: ansys.dpf.core.inputs.Input[ansys.dpf.core.fields_container.FieldsContainer]#

Allows to connect bending_moment_z input to the operator.

Fields Container of bending moment on axis z defined by user

Returns:: An Input instance for this pin.
Return type:: input

Examples

>>> from ansys.dpf import core as dpf
>>> op = dpf.operators.result.members_in_linear_compression_bending_not_certified()
>>> op.inputs.bending_moment_z.connect(my_bending_moment_z)
>>> # or
>>> op.inputs.bending_moment_z(my_bending_moment_z)

property InputsMembersInLinearCompressionBendingNotCertified.axial_force: ansys.dpf.core.inputs.Input[ansys.dpf.core.fields_container.FieldsContainer]#

Allows to connect axial_force input to the operator.

Fields Container of axial force defined by user

Returns:: An Input instance for this pin.
Return type:: input

Examples

>>> from ansys.dpf import core as dpf
>>> op = dpf.operators.result.members_in_linear_compression_bending_not_certified()
>>> op.inputs.axial_force.connect(my_axial_force)
>>> # or
>>> op.inputs.axial_force(my_axial_force)

property InputsMembersInLinearCompressionBendingNotCertified.class_cross_section: ansys.dpf.core.inputs.Input[bool]#

Allows to connect class_cross_section input to the operator.

Selection for a cross-section. True: Class 1 or 2 cross-sections. False: Class 3 cross section. If the user defines the cross section as class 1 or 2, the section modulus would be plastic section modulus. If it’s class 3- cross section,the section modulus would be elastic section modulus

Returns:: An Input instance for this pin.
Return type:: input

Examples

>>> from ansys.dpf import core as dpf
>>> op = dpf.operators.result.members_in_linear_compression_bending_not_certified()
>>> op.inputs.class_cross_section.connect(my_class_cross_section)
>>> # or
>>> op.inputs.class_cross_section(my_class_cross_section)

property InputsMembersInLinearCompressionBendingNotCertified.fabrication_type: ansys.dpf.core.inputs.Input[bool]#

Allows to connect fabrication_type input to the operator.

Selection of fabrication’s type if there are beams I in the structure. TRUE: Rolled Section, False: Welded Section. Default: Rolled Section.

Returns:: An Input instance for this pin.
Return type:: input

Examples

>>> from ansys.dpf import core as dpf
>>> op = dpf.operators.result.members_in_linear_compression_bending_not_certified()
>>> op.inputs.fabrication_type.connect(my_fabrication_type)
>>> # or
>>> op.inputs.fabrication_type(my_fabrication_type)

Method detail#

InputsMembersInLinearCompressionBendingNotCertified.__str__()#

InputsMembersInLinearCompressionBendingNotCertified.connect(inpt)#

Connect any input (an entity or an operator output) to any input pin of this operator.

Searches for the input type corresponding to the output.

Deprecated since version Deprecated: in favor of explicit output-to-input connections.

InputsMembersInLinearCompressionBendingNotCertified.__call__(inpt)#

InputsMembersInLinearCompressionBendingNotCertified.__getitem__(item) → Input#

InputsMembersInLinearCompressionBendingNotCertified#

Overview#

Import detail#

Property detail#

Method detail#

`InputsMembersInLinearCompressionBendingNotCertified`#